Watkins HotSpring Manuel du propriétaire télécharger pdf (Page 40)

MAINTAINING THE SANITIZER LEVEL

A. Sanitizer is extremely important for killing algae, bacteria and viruses, and preventing unwanted organisms from

growing in the spa. At the same time, you don’t want too high a sanitizer level, or it can irritate your skin, lungs and

eyes.

B. Always maintain the sanitizer level in your spa at the recommended level for each type of sanitizer.

C. Watkins recommends only the following sanitizers:

• FreshWater

™

Silver Ion Purifier with potassium monopersulfate or potassium peroxymonosulfate (MPS)

• Sodium Dichloro-s-Triazinetrione (Sodium Dichlor or chlorine)

• Sodium Bromine with MPS

WARNING: DO NOT use tri-chlor chlorine, any type of compressed bromine or chlorine, acid or any type of sanitizer

which is not recommended by Watkins.

Refer to the following two sections to use either the FreshWater

™

Silver Ion Purifier or Sodium Dichlor as your

sanitizer.

FRESHWATER

Ag+

™

SILVER ION PURIFIER

The FreshWater

™

Silver Ion Purifier used in conjunction with the addition of an aggressive oxidizer, such as a common

non-chlorine shocking agent (potassium monopersulfate, also known as MPS),will sanitize the spa water.

Silver Ions are also introduced into your spa water by using the FreshStart

™

10,000

Pre-filter when filling your spa.

Additionally, Watkins highly recommends the use of the FreshWater

II High Output Ozone System with the

FreshWater

™

Silver Ion Purifier.

IMPORTANT: Remember to use MPS designed for use in spas, such as Hot Spring

Spa Shock. Other non-chlorine

shocking agents for swimming pools may contain chemicals incompatible with the FreshWater

™

Silver Ion Purifier (such

as blue crystals in MPS). The recommended MPS should have an active ingredient content of 30% - 33%.

Water Quality and Maintenance Page 38

THE WATKINS WATER MAINTENANCE QUICK REFERENCE GUIDE

Steps Minimum Maximum To Raise To Lower

1 Total Alkalinity 125 150 Sodium Bicarbonate Sodium Bisulfate

2 Calcium Hardness 150 200 Calcium Hardness Use a mixture of

Increaser 75% hard water

and 25% soft water

or use a Stain and

Scale Inhibitor

3 pH 7.4 7.6 Sodium Carbonate Sodium Bisulfate

4 Sanitizer See section on Maintaining the Sanitizer Level

Ideal Range (ppm) What Chemicals to Use

1 2 ... 35 36 37 38 39 40 41 42 43 44 45 ... 51 52

Commentaires sur ces manuels

Pas de commentaire

Watkins HotSpring Manuel du propriétaire Page 40

Commentaires sur ces manuels

Produits connexes et manuels pour Piscines hors sol Watkins HotSpring